通信专业相关论文发表
先是联系杂志社投稿，在等待审核，杂志社审核就是找专家评定你的论文，这个时间一般都会很长，所以建议去早发表网。
通信工程方面的论文发表有一个期刊貌似就叫《信息通信》，不过自己找期刊社投稿会比较麻烦，而且也不确定就会搭理你，很多期刊社档期都是满满的，要排上最近的期刊时段很难，可以去壹品优刊网发表你的论文，什么样的要求只要跟客服说，就会跟你介绍。
论文发表的方法是：选定想要发表的论文期刊，找到该期刊的投稿方式并投稿，部分期刊要求书面形式投稿，大部分是采用电子稿件形式。在审稿通过以后即可将论文发表在期刊上。
普通刊物（省级、国家级）审核时间为一周，高质量的杂志，审核时间为14-20天。核心期刊审核时间一般为4个月，须经过初审、复审、终审三道程序。
国家没有对期刊进行级别划分。但各单位一般根据期刊的主管单位的级别来对期刊划为省级期刊和国家级期刊。省级期刊主管单位是省级单位。国家级期刊主管单位是国家部门或直属部门。
扩展资料：
发表论文的作用：
1、评职称；研究生毕业需要；教师 、医护人员 、科研院所的人员、企业员工等晋升高一级的职称时，发表期刊论文是作为一项必须的参考指标。
2、申报基金、课题 ：教育、科技、卫生系统 每年申报的国家自然科学基金项目、其它各种基金项目、各种研究课题时，发表论文是作为基金或课题完成的一种研究成果的结论性展示。
3、世界性基础领域的研究，比如在医学、数学、物理、化学、生命科学 等领域开展的基础性研究，公开发表论文 是对最新科技 科学研究成果、研究方法的一种展示和报道。以推动整个社会的科技进步等。
参考资料来源：百度百科—论文
发表论文无非就两种方式：第一种就是自己投稿，买本杂志，根据版权页上的投稿方式去投稿（这种的弊端就是周期太长，对于着急的客户，不适用）当然，跟杂志社关系好能顺利发表的请无视我的话因为直投杂志社容易，能成果发表难，我认识的主编跟我说他们邮箱里的稿件基本上没有低于过1000篇，而且杂志社就那么几个人，根本不可能忙的过来，就算抽时间看下邮件也就是看个题目，题目不新颖没吸引力的直接略过，就算点开文章，也是先大概看下职称、单位、研究方向、摘要、关键词，没什么吸引人眼球的内容也直接pass掉。第二种就是找代理机构发表（这种的需要睁大眼，发表行业鱼龙混杂，必须得保证自己发的杂志是正刊，也不能是增刊）。找代理机构认准以下几点；一、首先选择国家新闻出版广电局能查到的正规杂志二、其次是某宝担保交易，更有保障三、最后录用通知下来后，亲自打版权页或者收录网站（知网、维普、万方、龙源）上查稿电话查稿确认录用后，再付款。
通信专业相关论文发表英文
基于WIN CE的ADSL线路参数研究ADSL line parameters research based on WIN CE CE (also known officially as Windows Embedded CE since version 6.0[2][3], and sometimes abbreviated WinCE) is a variation of Microsoft's Windows operating system for minimalistic computers and embedded systems. Windows CE is a distinctly different kernel, rather than a trimmed-down version of desktop Windows. It is not to be confused with Windows XP Embedded which is NT-based. It is supported on Intel x86 and compatibles, MIPS, ARM, and Hitachi SuperH processors.FeaturesWindows CE is optimized for devices that have minimal storage—a Windows CE kernel may run in under a megabyte of memory. Devices are often configured without disk storage, and may be configured as a “closed” system that does not allow for end-user extension (for instance, it can be burned into ROM). Windows CE conforms to the definition of a real-time operating system, with a deterministic interrupt latency. It supports 256 priority levels and uses priority inheritance for dealing with priority inversion. The fundamental unit of execution is the thread. This helps to simplify the interface and improve execution time.Microsoft has stated that the ‘CE’ is not an intentional initialism, but many people believe CE stands for ‘Consumer Electronics’ or ‘Compact Edition’; users often disparagingly called it “Wince”.[4] Microsoft says it implies a number of Windows CE design precepts, including “Compact, Connectable, Compatible, Companion, and Efficient.”[5] The first version, known during development under the codename “Pegasus”, featured a Windows-like GUI and a number of Microsoft's popular applications, all trimmed down for smaller storage, memory, and speed of the palmtops of the day.Since then, Windows CE has evolved into a component-based, embedded, real-time operating system. It is no longer targeted solely at hand-held computers. Many platforms have been based on the core Windows CE operating system, including Microsoft's AutoPC, Pocket PC 2000, Pocket PC 2002, Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5.0, Windows Mobile 6, Smartphone 2002, Smartphone 2003 and many industrial devices and embedded systems. Windows CE even powered select games for the Sega Dreamcast, was the operating system of the controversial Gizmondo handheld, and can partially run on modified Microsoft Xbox game consoles.A distinctive feature of Windows CE compared to other Microsoft operating systems is that large parts of it are offered in source code form. First, source code was offered to several vendors, so they could adjust it to their hardware. Then products like Platform Builder (an integrated environment for Windows CE OS image creation and integration, or customized operating system designs based on CE) offered several components in source code form to the general public. However, a number of core components that do not need adaptation to specific hardware environments (other than the CPU family) are still distributed in binary form only.Development toolsVisual StudioLate versions of Microsoft Visual Studio support projects for Windows CE / Windows Mobile, producing executable programs and platform images either as an emulator or attached by cable to an actual mobile device. A mobile device is not necessary to develop a CE program. The .NET Compact Framework supports a subset of the .NET Framework with projects in C# and VB.NET, but not Managed C++.Platform BuilderThis programming tool is used for building the platform (BSP + Kernel), device drivers (shared source or custom made) and also the application. This is a one step environment to get the system up and running. One can also use Platform Builder to export an SDK (standard development kit) for the target microprocessor (SuperH, x86, MIPS, ARM etc.) to be used with another associated tool set named below.Embedded Visual C++ (eVC)The Embedded Visual C++ tool is for development of embedded application for Windows CE based devices. This tool can be used standalone using the SDK exported from Platform Builder or using the Platform Builder using the Platform Manager connectivity setup.Relationship to Windows Mobile, Pocket PC, and SmartPhoneOften Windows CE, Windows Mobile, and Pocket PC are used interchangeably. This practice is not entirely accurate. Windows CE is a modular/componentized operating system that serves as the foundation of several classes of devices. Some of these modules provide subsets of other components' features (e.g. varying levels of windowing support; DCOM vs COM), others which are mutually exclusive (Bitmap or TrueType font support), and others which add additional features to another component. One can buy a kit (the Platform Builder) which contains all these components and the tools with which to develop a custom platform. Applications such as Excel Mobile/Pocket Excel are not part of this kit. The older Handheld PC version of Pocket Word and several other older applications are included as samples, however.Windows Mobile is best described as a subset of platforms based on a Windows CE underpinning. Currently, Pocket PC (now called Windows Mobile Classic), SmartPhone (Windows Mobile Standard), and PocketPC Phone Edition (Windows Mobile Professional) are the three main platforms under the Windows Mobile umbrella. Each platform utilizes different components of Windows CE, as well as supplemental features and applications suited for their respective devices.Pocket PC and Windows Mobile is a Microsoft-defined custom platform for general PDA use, and consists of a Microsoft-defined set of minimum profiles (Professional Edition, Premium Edition) of software and hardware that is supported. The rules for manufacturing a Pocket PC device are stricter than those for producing a custom Windows CE-based platform. The defining characteristics of the Pocket PC are the digitizer as the primary Human Interface Device and its extremely portable size.The SmartPhone platform is a feature rich OS and interface for cellular phone handsets. SmartPhone offers productivity features to business users, such as email, as well as multimedia capabilities for consumers. The SmartPhone interface relies heavily on joystick navigation and PhonePad input. Devices running SmartPhone do not include a touchscreen interface. SmartPhone devices generally resemble other cellular handset form factors, whereas most Phone Edition devices use a PDA form factor with a larger display.Windows Mobile 5 supports USB 2.0 and new devices running this OS will also conform to the USB Mass Storage Class, meaning the storage on PPC can be accessed from any USB-equipped PC, without requiring any extra software, except requiring a compliant host. In other words, you can use it as a flash drive.Competing productsCompetitors to consumer CE based PDA platforms like Pocket PC – the main application of Windows CE – are Java, Symbian OS, Palm OS, iPhone OS and Linux based packages like Qtopia Embedded Linux environment from Trolltech, Convergent Linux Platform from a La Mobile, and Access Linux Platform from Orange and Access.The secondary usage of CE is in devices in need of graphical user interfaces, (point of sale terminals, media centers, web tablets, thin clients) as the main selling point CE is the look and feel being similar to desktop Windows. The competition is Windows XP, Linux and graphical packages for simpler embedded operating systems.Being an RTOS, Windows CE is also theoretically a competitor to any realtime operating system in the embedded space, like VxWorks, ITRON or eCos. The dominating method, however, of mixing Windows look and feel with realtime on the same hardware, is to run double operating systems using some virtualization technology, like TRANGO Hypervisor from TRANGO Virtual Processors or Intime from TenAsys in the case of Windows, and OS Ware from VirtualLogix, Padded Cell from Green Hills Software, OKL4 from Open Kernel Labs, TRANGO Hypervisor from TRANGO Virtual Processors, RTS Hypervisor from Real-Time Systems or PikeOS from Sysgo, in case of the competition.---------Asymmetric Digital Subscriber Line (ADSL) is a form of DSL, a data communications technology that enables faster data transmission over copper telephone lines than a conventional voiceband modem can provide. It does this by utilizing frequencies that are not used by a voice telephone call. A splitter - or microfilter - allows a single telephone connection to be used for both ADSL service and voice calls at the same time. Because phone lines vary in quality and were not originally engineered with DSL in mind, it can generally only be used over short distances, typically less than 3mi (5.5 km) [William Stallings' book].At the telephone exchange the line generally terminates at a DSLAM where another frequency splitter separates the voice band signal for the conventional phone network. Data carried by the ADSL is typically routed over the telephone company's data network and eventually reaches a conventional internet network. In the UK under British Telecom the data network in question is its ATM network which in turn sends it to its IP network IP Colossus.The distinguishing characteristic of ADSL over other forms of DSL is that the volume of data flow is greater in one direction than the other, i.e. it is asymmetric. Providers usually market ADSL as a service for consumers to connect to the Internet in a relatively passive mode: able to use the higher speed direction for the "download" from the Internet but not needing to run servers that would require high speed in the other direction.There are both technical and marketing reasons why ADSL is in many places the most common type offered to home users. On the technical side, there is likely to be more crosstalk from other circuits at the DSLAM end (where the wires from many local loops are close to each other) than at the customer premises. Thus the upload signal is weakest at the noisiest part of the local loop, while the download signal is strongest at the noisiest part of the local loop. It therefore makes technical sense to have the DSLAM transmit at a higher bit rate than does the modem on the customer end. Since the typical home user in fact does prefer a higher download speed, the telephone companies chose to make a virtue out of necessity, hence ADSL. On the marketing side, limiting upload speeds limits the attractiveness of this service to business customers, often causing them to purchase higher cost Digital Signal 1 services instead. In this fashion, it segments the digital communications market between business and home usersHow ADSL worksOn the wireCurrently, most ADSL communication is full duplex. Full duplex ADSL communication is usually achieved on a wire pair by either frequency division duplex (FDD), echo canceling duplex (ECD), or time division duplexing (TDD). FDM uses two separate frequency bands, referred to as the upstream and downstream bands. The upstream band is used for communication from the end user to the telephone central office. The downstream band is used for communicating from the central office to the end user. With standard ADSL (annex A), the band from 25.875 kHz to 138 kHz is used for upstream communication, while 138 kHz – 1104 kHz is used for downstream communication. Each of these is further divided into smaller frequency channels of 4.3125 kHz. During initial training, the ADSL modem tests which of the available channels have an acceptable signal-to-noise ratio. The distance from the telephone exchange, noise on the copper wire, or interference from AM radio stations may introduce errors on some frequencies. By keeping the channels small, a high error rate on one frequency thus need not render the line unusable: the channel will not be used, merely resulting in reduced throughput on an otherwise functional ADSL connection.Vendors may support usage of higher frequencies as a proprietary extension to the standard. However, this requires matching vendor-supplied equipment on both ends of the line, and will likely result in crosstalk issues that affect other lines in the same bundle.There is a direct relationship between the number of channels available and the throughput capacity of the ADSL connection. The exact data capacity per channel depends on the modulation method used.[edit] ModulationADSL initially existed in two flavours (similar to VDSL), namely CAP and DMT. CAP was the de facto standard for ADSL deployments up until 1996, deployed in 90 percent of ADSL installs at the time. However, DMT was chosen for the first ITU-T ADSL standards, G.992.1 and G.992.2 (also called G.dmt and G.lite respectively). Therefore all modern installations of ADSL are based on the DMT modulation scheme.Annexes J and M shift the upstream/downstream frequency split up to 276 kHz (from 138 kHz used in the commonly deployed annex A) in order to boost upstream rates. Additionally, the "all-digital-loop" variants of ADSL2 and ADSL2+ (annexes I and J) support an extra 256 kbit/s of upstream if the bandwidth normally used for POTS voice calls is allocated for ADSL usage.While the ADSL access utilizes the 1.1 MHz band, ADSL2+ utilizes the 2.2 MHz band.The downstream and upstream rates displayed are theoretical maxima. Note also that because Digital subscriber line access multiplexers and ADSL modems may have been implemented based on differing or incomplete standards some manufacturers may advertise different speeds. For example, Ericsson has several devices that support non-standard upstream speeds of up to 2 Mbit/s in ADSL2 and ADSL2+.[edit] Installation issuesDue to the way it uses the frequency spectrum, ADSL deployment presents some issues. It is necessary to install appropriate frequency filters at the customer's premises, to avoid interferences with the voice service, while at the same time taking care to keep a clean signal level for the ADSL connection.In the early days of DSL, installation required a technician to visit the premises. A splitter was installed near the demarcation point, from which a dedicated data line was installed. This way, the DSL signal is separated earlier and is not attenuated inside the customer premises. However, this procedure is costly, and also caused problems with customers complaining about having to wait for the technician to perform the installation. As a result, many DSL vendors started offering a self-install option, in which they ship equipment and instructions to the customer. Instead of separating the DSL signal at the demarcation point, the opposite is done: the DSL signal is "filtered off" at each phone outlet by use of a low pass filter, also known as microfilter. This method does not require any rewiring inside the customer premises.A side effect of the move to the self-install model is that the DSL signal can be degraded, especially if more than 5 voiceband devices are connected to the line. The DSL signal is now present on all telephone wiring in the building, causing attenuation and echo. A way to circumvent this is to go back to the original model, and install one filter upstream from all telephone jacks in the building, except for the jack to which the DSL modem will be connected. Since this requires wiring changes by the customer and may not work on some household telephone wiring, it is rarely done. It is usually much easier to install filters at each telephone jack that is in use.
移动通信作为一个科技密集型和知识密集型的高新技术产业，在现代市场经济条件下，在竞争空间日趋激烈和社会信息化发展趋势下，必须十分重视市场营销管理，重视市场营销管理体系建设。要充分根据市场需求的现状与趋势，制定计划，合理有效配置资源。通过有效地满足市场需求，来赢得竞争优势，在加快市场营销步伐的同时，努力建立和完善移动通信市场营销管理体系，以不断适应新的发展形势需要。1目前国内移动通信市场营销管理的现状“市场部”这个词走进国内企业还是近几年的事，目前移动通信企业内部所设置的营销部、分销处、运营部、销售部、以及市场管理部等都是市场部的涵盖范围。从分营后的中国移动通信、中国联通、上海光大、电信长城等具有运营资格的运营商来看，中国移动通信市场营销做的比较大，在原先营业厅基础上，又发展了商场、专卖店、量贩等销售形式，给人一种规模和实力的感觉，然而市场知名度高，但市场品牌忠诚度低；中国联通起步晚，但市场经济条件下没有迟到的经营者，只有善于经营的赢家，中国联通采取分销商网络营销的思路引起业内效仿，但诸多不完善的环节也时常引起消费者反应；其它几家运营商尽管营销思路很前卫，但是制约其市场开发的因素较多，市场反应冷淡。可以说，目前移动通信企业市场营销管理是各行其道，短期行为太多，缺乏长远统一的规划。从行业整个市场来看，我国移动通信企业尚未真正掌握专业营销知识和操作技能，就其对市场的态度和行为而言，移动通信企业还处于为完成短期销售目标而采用广告、公关、有奖销售等促销手段为主的促销导向型阶段，尚未达到市场营销导向型阶段。当然，其中原因也有我国通信行业长期处于垄断阶段的因素，广大从业者没有市场危机感。没有市场危机感就不会产生市场营销紧迫感，对市场营销管理的认识和努力只是在竞争机制下才有所转变。就移动通信行业进入市场经济状态的时间和目前市场供需关系的状况看，从业者的观念和认识的迅速提高要靠调查、分析、预测、营销企划等方式来引导、开拓、扩大和满足广大消费者对其服务的需求来完成，进而达到企业整体长远的营销目标的实现，尽管尚须时日，但这是市场营销的需求和必然发展趋势。从市场发展规律来看，卖方市场到买方市场的转变往往是在市场开始竞争之时，对竞争日渐激烈的移动通信业而言，具有前瞻性目光的人士早已看到，初露端倪的买方市场正在形成。如何适应市场、创造市场，是移动通信企业面临的带有战略性的问题。移动通信商们应该清醒认识到，拥有目前的市场并不完全意味着必然占有市场，还必须依靠行之有效的方式去进行市场拓展，发展市场，创造市场，这个行之有效的方式就是建立和完善企业的市场营销管理体系。2市场营销管理体系的组成和细分从事过营销的人都知识，市场营销的表现是市场管理，市场营销管理的实质是需求管理。企业在开展市场营销的过程中，一般要设定一个在目标市场上预期要实现的交易水平。然而，实际需求水平可能低于、等于、或高于这个预期的需求水平，换言之，在目标市场上，可能没有需求、需求很小或超量需求，市场营销管理就是要对付这些不同的需求，市场营销管理体系就是要对市场营销管理进行科学有效组合。根据移动通信行业自身特点以及市场的发展情况来看，移动通信市场营销管理体系应包括五个方面：(1)市场需求管理；(2)市场营销网络管理；(3)市场推动管理；(4)市场营销环境管理；(5)市场营销组织管理。这个市场营销管理体系就是通过创造建立和保持与目标市场之间的有益交换和联系，以实现移动通信企业的各种目标并进行分析、计划、执行和控制的市场营销指挥系统，可以说，这个系统不仅是定价、分销、促销等单一活动的职能行使，而是一个目标市场运作的中枢神经系统，通过这个系统，企业不断观察市场，发现和评估各种变化因素，然后反馈企业，作为企业制定新战略和行动计划的基础，然后运用新的修正过的行动来消除阻碍目标实现的因素，并观察评价客户和竞争对此作出的反应，然后再反馈到企业使企业再次形成新的战略修正方案推向市场，这样形成良性循环，以达到不断适应市场，创造市场的目的。就移动通信市场营销管理体系的五个组成部分而言，既有机地结合，又独立工作，每一部分又包涵着丰富的细分内容。2.1市场营销需求管理细分我们知道，市场营销管理的实质是需求管理。根据市场需求水平、时间和性质不同，市场需求一般有八种不同状况：(1)负需求；(2)无需求；(3)潜伏需求；(4)下降需求；(5)不规则需求；(6)充分需求；(7)过量需求；(8)有害需求。从市场的组成要素人口、购买力、购买欲望来看，目前移动通信市场需求状况基本处于充分需求和潜伏需求的阶段，是市场开拓者应好好把握的大好时机。市场营销需求管理就是要对市场的需求状况进行有效管理，充分做好市场调查研究，深入市场，广泛了解客户、顾客、分销商、供应商以及广告反应、行业信息、营销网络、促销效果等有关业内的综合情况，广泛搜集市场信息，摸准市场的变化，找准潜在市场及市场盲区和死角，做出详尽属实的市场调研分析报告，以便企业的企划者以此制定市场营销企划方案，制定新业务计划。可以说，市场营销需求管理是企业营销工作的一双眼睛。一般来说，市场营销需求管理包括目标市场分析和市场目标分析两个方面。(1)目标市场影响移动通信目标市场的因素较多，从市场定位、营销策略、促销政策、广告方式、产品价格、产品包装及外形到技术先进程度、购买形式、服务态度、营销网络建设、售后服务等方面都要认真考虑。目标市场变化不断，移动通信运营商也要依据市场的变化不断变化营销管理思路。从手机市场上我们可以看到，手机从当初的组织消费购买到如今的私人消费购买为主，目标市场的变化也引起供应商的努力，摩托罗拉从当初以行政机关领导为主到现在形色多样的各种层次手机，正是目标市场使然。移动通信商要在研究目前目标市场的综合情况时，不断把目光投向市场的新变化，进行市场细分与目标市场新选择，准确把握和预测市场需求的发展动态，才能做到有的放矢。(2)市场目标那些收入稳定、有一定的经济实力和地位的人群，固然是市场目标，但这些人早已是手机的拥有者，移动通信商关注的是新增长的消费层和高消费层新的消费变化。市场永远在变化，所有稳定都是暂时的，移动通信市场也不例外。不同的消费者有不同的变化，从行政机关公务员、企业老板到小业主、企业白领阶层、打工仔，不同年龄不同性别，需求不同，变化也不同，兴趣爱好各异，审美观点有别，需要市场开拓者仔细研究，区别对待，进行准确市场定位。这一点我们从外企的情况可以看出，摩托罗拉手机以厚重大方为主，为行政机关人员和高级管理者所看重；诺基亚以专业公司著称，倡导科技以人为本，平均不到一周时间推出新款，其先进的形象对新潮时尚人士和高级知识分子具有较强吸引力，而在全国各大媒体统一推出的《专业、全面、关怀》系列宣传篇，更是把诺基亚推向大众化市场；爱立信则以灵巧方便为高级商务人士所青睐；飞利浦更是以外形美观色彩明快吸引着广大青年消费者。我国的科键、波导、康佳则以工薪阶Mobile communications as a technology-intensive and knowledge-intensive high-tech industries, in a modern market economy, the space in the increasingly fierce competition and social development trend of information technology, we must attach great importance to marketing management, attention to marketing management system. To fully meet market demand the status and trends, planning, rational and efficient allocation of resources. To effectively meet the market demand, to gain a competitive advantage in accelerating the pace of marketing at the same time, efforts to establish and improve mobile communications marketing management system to continuously adapt to the new development of the situation. 1 domestic mobile communications marketing management status "Market" or words into the domestic enterprises in recent years, the current mobile communication enterprises set up by the marketing, distribution, the Ministry of operations, sales and market management, and so are the Department of the Ministry of the coverage of the market . From the camp after China Mobile, China Unicom, the Shanghai Everbright, telecommunications operators, such as the Great Wall of qualified operators, China Mobile Marketing to do more, in the original business on the basis of the Office and the development of shopping malls, Stores, hypermarkets and other forms of sales, gives people a sense of size and strength, but the market well-known, but the market is low brand loyalty; China Unicom late start, but not under market economy conditions late for the operators, only good at business The winner, China Unicom network marketing distributors to take the ideas from the industry to follow, but many imperfections often caused part of the response of consumers; several other carriers despite the very avant-garde marketing ideas, but restricted their market development than the factors , The market cold. It can be said that the current mobile communication business marketing management is Gexingqidao, too much short-term, long-term lack of unified planning. From the industry look at the entire market, China's mobile communication business has yet to truly master professional knowledge and operating skills marketing, on his attitude and behaviour of the market, the mobile telecommunications sector is still in the short-term sales target for the completion of using advertising, public relations, sales crossword , And other promotions based marketing-oriented stage, have not yet reached the market-oriented marketing stage. Of course, the reasons for China's communications industry has a monopoly stage of the long-term factors, the majority of market practitioners no sense of crisis. No market will not have a sense of crisis on the marketing sense of urgency, the market knowledge and marketing management efforts in the mechanism of competition only if they changed. On the mobile communications industry into the market economy status of the time and the market supply and demand situation, the practitioners of the concept and awareness of the rapid increase to rely on investigation, analysis, forecasts, marketing and other ways to guide the planning, development, to expand and meet the majority of consumer To demand for its services to complete, thereby achieve their overall long-term goal of marketing, despite the need to be given time, but this is the marketing needs and inevitable trend. From the development of the market, a seller's market to a buyer's market is often the changes in the market when the competition began, the increasingly fierce competition in the mobile communications industry, are forward-looking vision of people already see emerging is a buyer's market Formation. How to adapt to the market and create markets, is facing the mobile communications companies with strategic issues. Mobile communications have to be clearly recognized that the current market has not fully occupy the market will inevitably mean that, we must rely on effective ways to conduct market development, market development, market creation, the effective ways is to build and Improve enterprise marketing management system. 2 marketing management system and the breakdown of the composition Engaged in the marketing people have the knowledge, marketing is the performance of market management, marketing management, in essence, is demand management. In carrying out marketing enterprises in the process, to set a general target market in order to achieve the expected level of transactions. However, the level may be lower than actual demand, equal to or higher than the expected level of demand, in other words, the target market, may not demand, needs little or excessive demand, marketing management is to deal with these different needs, Marketing Management System is to the marketing management of scientific and effective combinations. According to the mobile telecommunications sector of its own characteristics and the development of the market situation, mobile communications marketing management system should include five areas: (1) market demand management, (2) marketing network management, (3) market-driven management, (4 ) Marketing environment management, (5) marketing organization and management. The marketing management system is established and maintained through the creation of target markets and between the exchange and useful links, mobile communication enterprises in order to achieve the objectives and analysis, planning, implementation and control of the marketing chain of command, it can be said that this System is not only pricing, distribution, marketing and other activities of the functions of a single exercise, but a target market operation of the central nervous system, through this system, enterprises have continuously observe the market, the detection and assessment of the changes, and then feedback enterprises, as enterprises develop New strategies and action plans based on, and then use the new revised action to eliminate obstacles to achieve the objectives, and to observe and evaluate customer response to this competition, and then back to the enterprises so that enterprises once again to form a new strategic programme that Into the market, such a virtuous circle, constantly adapting to the market to achieve, the purpose of creating the market. Marketing on the mobile communication management system of five components, the combination of both, working independently, each part also includes a breakdown of rich content. 2.1 marketing demand management breakdown We know that marketing management is the essence of demand management. According to market demand, time and a different nature, the general market demand has eight different conditions: (1) negative demand (2) No demand, (3) latent demand (4) decreased demand (5) irregular demand; (6) the full demand (7) excessive demand (8) harmful demand. From the constituent elements of the market, purchasing power, the desire to purchase, the current mobile communication market demand situation is basically in full demand and potential demand for the stage, the market should take full advantage of the pioneers of opportunity. Marketing is to manage demand in the market demand for effective management, to make full market research studies, in-depth market, broad knowledge of clients, customers, distributors, suppliers and advertising response, industry information, marketing network, promotional effects On the comprehensive situation of the industry, extensive collection of market information, Mozhun market changes, and identify potential markets and market blind spots and dead ends, make a detailed analysis of the case of market research reports in order to enterprises are planning to develop marketing planning programme, The development of new business plan. It can be said that marketing needs of enterprise marketing management is the work of the pair of eyes. In general, marketing demand management, including the target market analysis and objective analysis of two aspects of the market. (1) target market Impact of mobile communications market factors more objective, market positioning, marketing strategy, promotion policies, advertising, product prices, product packaging and appearance to the advanced level of technology, purchase forms, service and marketing network construction, service and other aspects To seriously consider. Target market changes constantly, mobile communication operators to market changes based on the changing marketing and management ideas. From the phone on the market, we can see that the phone from the original purchase of consumer organizations to today's mainly the purchase of private consumption, the target market also caused changes in the supplier's efforts, Motorola from the original mainly in the executive leadership to diverse now Xingse Various levels of mobile phones, the result is the target market. Mobile communications have to study the current target market in the comprehensive situation, keep eyes on the new changes in the market, market segmentation and target market of new options, accurate grasp of market demand and projected developments can be targeted. (2) target market Those who are stable, have a certain economic strength and status of the crowd, of course, is the target market, but these people have long been the owner of a mobile phone, mobile communications are concerned that the new growth of consumption and high consumption of the new changes in consumption. The market will never change, and stability are all temporary, mobile communications market is no exception. Different consumers have different changes, from the administrative organs of civil servants, owners of small business owners, corporate white-collar class, wage earners and age groups of different sex, different needs, different changes, different hobbies, aesthetic views are different, the needs of the market Portland careful study and treat them differently, accurate market positioning. This is the situation we can see that foreign invested enterprises, Motorola mobile phones mainly to heavy generous, for the executive officers and senior managers by value; Nokia to a professional company, science and technology to promote people-centered, less than a week the average time a new , Of its advanced image of the futuristic and intellectuals have strong appeal, and the reunification of the country the major media's "professional, comprehensive and caring" series of promotional articles, Geng Shiba popular Nokia push the market; love Ericsson while ingenious convenient for senior business people favor; Philips is a more attractive appearance bright colors to attract a large number of young consumers. China's key Branch, Bird, Konka while working order
高水平。经查询二区sci期刊的相关资料得知，二区的sci期刊含金量较高，所以通信专业发二区sci期刊的水平是高水平。SCI，ScienceCitationIndex，即科学引文索引所收录的SCI期刊上刊登的学术期刊论文。
发表专业相关论文
发表一篇学术论文（特别是SCI、SSCI）不是一件很简单的事情，往往需要经历一个相对漫长的过程。对于科研新手而言，可能比较好奇发表一篇学术论文需要经过哪些步骤，今天就以理工科生发表SCI为例来谈一谈。第一步，数据收集要想发论文，首先得有拿得出手的东西，对理工科生来说，就必须有值得发表的数据，因此收集数据是发表一篇学术论文的第一步（此处忽略选题、文献调研等前期工作）。一般来说，理论性的论文可以将一些理论计算、仿真分析等结果作为数据，构成一篇论文；工程性的论文，往往需要实验数据，如果再结合一些理论分析（增加实验结果的可信度），会给文章加分不少。看过这么多文献，我发现比较牛逼的文章往往有深厚的理论分析。收集数据是第一步，也是最难、最耗时间的一步，因为你的数据是否漂亮一定程度决定了论文的创新性和价值。为了获得好的数据，好课题的重要性不言而喻，但更需要的是潜心钻研、经得住磨炼的精神。实验往往是残酷的，可能10次实验里前9次都是失败的，只有最后一次成功了，可能干脆全崩了，这时我们的心态也有可能跟着崩了。因此，不能害怕失败，就算失败了也要稳住心态，分析失败的原因，从而找出解决办法，一步一步完善实验。理论计算和仿真分析，有时比做实验更有挑战，因为往往只有具备深厚的数学和专业基础才能做好这一块，这不是一日之功就能完成的，往往需要长期的知识积累和很强的学习能力。当接触了一个新的方向时，我们对其理论背景往往不是非常熟悉，这时大量阅读文献，特别是英文书籍就很有必要，这个过程是痛苦且漫长的。第二步，数据处理/科研绘图数据很重要，数据分析也不能轻视。运用适当的数据分析方法有助于我们掌握数据的特点和内在规律，引发我们新的思考。因为论文的讨论（discussion）部分都是围绕数据展开的，数据的特点更丰富，值得说的点就更多，写起文章来也更容易。论文中的图（Figure）除了数据图还有示意图，炫酷的示意图能给论文增加不少印象分，相信审稿人看到一篇作图水平非常高的论文心情都会好很多吧。像CNS这种级别的论文的作图那叫一个赏心悦目，据说有个学者为了将一颗白菜的三维图做的更漂亮，买了一车的白菜来研究！因此掌握一定的数据处理/科研绘图能力非常重要，平时可以学一下相关的软件，知乎上有个相关的帖子打击可以点击“阅读原文”看一下。第三步，论文撰写数据处理好了，下一步自然就是撰写论文了。有了好东西，得把它说得漂亮才行，就像你开发了个好产品，但是卖得不好也没用。学术论文的结构总是差不多，相信文献看多了之后就发现，总是少不了摘要（abstract）、前言（introduction）、结果（results）、讨论（discussion）、总结（conclusion）等几个部分。在写论文初稿时，不要想着论文的排版，只管把该写的内容写下来就好（word单栏即可，或者LaTeX）。初稿完成后，再根据想要投稿的期刊的格式要求对论文进行排版，一般来说期刊会在官网提供投稿模板（template），按照要求修改格式即可。其实，投稿论文（manuscript）的格式要求和最后发表的格式往往并不一样，涉及到的都是一些比较简单的排版（字体大小、论文结构、图表等 ），因此完全不用为排版担心。因为发表前，期刊编辑会按照发表格式的要求对论文进行重新排版的。总之记住一点，写论文时把重点放在内容上，而不是格式上。论文撰写过程中，英文的表达非常重要，因此平时在文献阅读过程中，要养成积累优秀句型的习惯，做好笔记，拿来即用。前面有几期介绍过一些有助于论文写作的网站，如《论文写作时，堪称神器的网站！》。如果对自己的英文写作不够自信，最好请外国人或者相关的机构润色一下。论文写作过程中，还有一个非常重要的环节就是参考文献格式的书写。我发现身边很多人都会受这个困扰，花很多时间去琢磨如何排版参考文献。其实，有很多优秀的工具可以帮助我们做到这些，比如前面介绍的软件Zotero，后期我会专门讲解如何排版参考文献。
你是一个普通人，那么想在专业期刊上发表论文是非常难的事情，因为虽然你有自己的思路和看法，但是专业期刊一般专业性更强一些。除非你有这样的专业知识。
如果你写的文章确实很好，就找一期刊发邮件过去，他们的编辑会提出一些修改意见。但是现在国内的一些期刊不怎么接受本科生的论文，他们认为本科生写不出高水平的论文，再有就是期刊要写作者通讯地址，和其他信息，要是别人看到是本科生的论文，就会认为期刊不怎么样。你先找一个发过去，看看他们的修改意见等。若要求必须导师是第一作者的话，而且你也能接受，就找你们学校的老师，把他们的名字挂上。不能接受的话，你就多和他们沟通一下，看看能不能发。只能帮你这些。
在国内期刊上面发表要上千了，但要求也很好。
想简单点要么就是一般的普刊，价格就相对比较低，几百到几千不等，看自己心里面怎么选择了
发表论文相关专业
发表吧是中国最早一批论文服务网站之一。历经多年的发展，于2010年11月份最终定名为"发表吧"品牌性论文发表学术交流网站。现已成为国内较为大型的论文创作辅导和期刊推荐发表的学术交流平台。发表吧是论文服务网站的杰出代表，是一个专门在广大投稿者和核心、省级、国家级、各大杂志社之间搭建的一个网络沟通桥梁。通过这个平台，广大作者不必再像以前一样，逐一向每家杂志社投稿，而只需要将您的论文投递给该网站的征稿中心，网站编辑人员，会在一天之内完成对您稿件的初审，并为您推荐最适合的杂志社。三天内，作者便可以得到论文是否可以出版的具体消息。
经济类的刊物都可以发表 还有工科类综合
论文发表的类别有：
1、专题型
这是分析前人研究成果的基础上，以直接论述的形式发表见解，从正面提出某学科中某一学术问题的一种论文。
2、论辩型
这是针对他人在某学科中某一学术问题的见解，凭借充分的论据，着重揭露其不足或错误之处，通过论辩形式来发表见解的一种论文。
3、综述型
这是在归纳、总结前人或今人对某学科中某一学术问题已有研究成果的基础上，加以介绍或评论，从而发表自己见解的一种论文。
4、综合型
这是一种将综述型和论辩型两种形式有机结合起来写成的一种论文。
论文的产出报告：
中国科学技术信息研究所2019年11月19日发布的显示，2018年中国卓越科技论文共计31.59万篇，比2017年增加12.4%，包括卓越国际科技论文14.45万篇，卓越国内科技论文17.15万篇。
从学科分布来看，临床医学、化学、生物学和电子、通讯与自动控制专业的卓越科技论文数量最多，其中，排名第一的临床医学超过43000篇。
以上内容参考：百度百科—论文
能发在专业期刊上最好了，也不一定的，有的学校和导师要求不严，要求只在知网万方数据库能查的到，不要求太多的，可以选择广泛一些，学校要求严格的，就发专业的期刊吧，一切以学校和导师的要求为主。
发表专业相关的论文
毕业论文需要发表相关的论文就是写论文的时候查询资料的文章。 发表的论文的研究内容与你的毕设（学位论文）内容是相关的，一般是其中的一部分。比如你的毕设是研究一个完整的雷达系统，你的小论文可能只是介绍这个雷达系统的接收机部分，这可以叫内容相关。
职称论文，顾名思义就是指在一定职业范围内，用于评定一定职业职称的论文形式。一般职称论文在不同职业领域内所分等级不同，如工程师领域，可分为初级工程师论文、中级工程师论文和高级工程师论文等。
首先，根据个人专业方向选择期刊，在内容方向上，期刊可分为综合性期刊和专业性期刊两大类，按学科分，可将杂志分为社科期刊、科技期刊、普及期刊等三大类，社科期刊中又可分为新闻类、文艺类、理论类、评论类等；科技期刊可分成理科类、娱乐类、科普类等。按期刊级别分，可分为省级期刊、国家级期刊和核心期刊。
正规的期刊都有两个刊号，一个是ISSN刊号，即国际刊号，一个是CN刊号，即国内标准刊号。公开发行的期刊都可以通过国家新闻出版总署查询，查询程序：国家新闻出版总署 办事服务 便民查询 期刊杂志查询。
论文发表有两种方式，通过自己投稿，但这种方式往往石沉大海，基本没有录用机会；也可以找论文发表服务机构发表更加快捷，通过率高，审稿快，见刊迅速。
至于选择什么样的期刊可依据单位的职称文件，依据职称文件选择满足条件的期刊就可以了。也可依据自身的专业方向，选择专业期刊还是综合性期刊，选择国家级期刊，还是省级期刊，一般来说专业不一样，地域不一样，要求不一样，就工程师来说，一般情况，工程师职称评定的论文要求为：2篇以上，2000-3000字篇幅，发科技科工或专业类期刊，高级工程师职称评定论文要求：必须2篇以上论文，3000字符以上，必须是专业期刊。
教育系列，中级职称评定论文要求一般需要发自身专业方向上的省级期刊，2000字以上篇幅，2篇，高级职称评定论文要求一般需要发专业期刊，3000字以上篇幅，著作需要副主编挂名1本及以上，教材或专著。
农业系列（经济专业除外）中级职称评定论文要求一般需要发2篇以上论文，2000-3000字符，高级职称评定论文要求发3000字以上，省级期刊或者专业期刊。
财经系列中级职称是通过考试，高级职称需要发2000字以上2篇以上在相关经济期刊上。
思想政治工作专业，政工师申报高级政工师需要发2-3篇3000字符以上论文，发管理类期刊，或者企业文化类，思想文化类期刊。
新闻出版类（新闻专业、广播电视播音专业、出版专业）中级职称评定论文要求一般要满足，专业期刊，2000字以上篇幅，2篇以上论文；高级职称评定论文要求一般要满足，必须是国家期刊、专业期刊。
新闻出版类档案图书资料文物博物群众文化专业，中级职称评定论文要求一般要满足，专业期刊2000字以上，2篇以上论文。高级职称评定论文要求：须发专业、核心级期刊2篇以上论文。
本题由“华笙医学编译”为您解答！
期刊应该是有要求 ，要看你们评职称的规定有没有说什么级别，什么类型，这些都是有要求的，论文肯定是根据你的专业来啊，如果承认oa刊的话，投汉斯出版社的也可以，之前也有一些评职称的说在这里投过的
这是一个问题，看你们的要求是什么，如果要求不高的话就发综合刊这样便宜，如果要求高的话只能发专业刊，比如电力的就要发到电子的期刊上去。